Rengasennuste

Slippery roads

A road is slippery when there is ice or snow on its surface. A dry road keeps its grip even below zero. A road surface below zero, however, freezes the rain and meltwater that land on it, and the moisture in the air forms frost on it. That is why the map's colour is computed from whether the road surface freezes or snow stays on it.

Why does a road freeze above zero?

Air +2 °C Road −1 °C

Because the road surface can be colder than the air. On a clear, calm night the road radiates heat to the sky and cools below zero while the thermometer still reads above it.

On a cloudy night the road stays warmer, because the clouds send heat back to the ground.

A weather forecast gives the air temperature two metres above the ground, not the road surface temperature.

On the map The colour is computed from the road surface temperature, not the air temperature. Measured and estimated road surface

What is frost?

Moist air Road −2 °C

Frost is ice that forms straight from the moisture in the air. When the road surface is below zero, water vapour settles on it as ice crystals. No rain is needed, so a road can turn slippery on a dry night.

Frost forms mostly at night and early in the morning.

Bridges and roads near water are especially prone to it, because the water adds moisture to the air.

In freezing fog, the tiny water droplets also freeze onto the road surface.

On the map The calendar shows this mark on days when the road surface gets cold enough for frost to form on it.

What is black ice?

Both look wet Wet road +1 °C Black ice −1 °C

Black ice is a thin, clear layer of ice that the asphalt shows through. It forms when a wet road freezes. The road looks merely wet although it is icy.

The water can come from rain, melting snow or fog.

A road is at its most slippery when the temperature is near zero and there is water on top of the ice.

On the map The map tells whether the road surface freezes, but not whether the road is wet. Black ice is therefore possible on any day the road freezes.

What is freezing rain?

Snow Snow melts Water cools +2 °C −3 °C Freezes on contact

Freezing rain is water that freezes the moment it hits the ground. Usually about a kilometre up there is a layer of air above zero, where snow melts into rain. Below it the air is below zero, and the supercooled drops freeze onto roads, cars and trees.

Freezing drizzle has smaller drops and often falls from low cloud.

The Finnish Meteorological Institute names freezing rain that cannot be treated in time as an example of very poor driving conditions.

On the map When the Finnish Meteorological Institute’s road weather forecast has freezing rain in the coming hours, the day counts as a freezing day and the calendar shows this mark.

When do snow and sleet stay on the road?

Melts Stays Road +2 °C Road −1 °C

When the road surface is cold enough. Light snow melts on a road above zero, which merely gets wet. In heavy snow or sleet even a road slightly above zero can be covered in slush, because melting the snow cools the road.

Sleet is a mix of water and wet snow. It forms when some of the snowflakes melt on the way down.

Packed snow is snow that traffic has pressed into a hard, dense layer.

At about 7 degrees below zero or colder, road salt no longer works, so even a thin layer of snow can make the road slippery.

On the map Snow and sleet affect the colour only when the road surface is cold enough during the fall to hold the snow. The heavier the fall, the warmer the road surface it can settle on. In the calendar this mark means snowfall that stays on the road.

Where does the road freeze first?

Hill +1 °C Hollow −2 °C Bridge −1 °C

On bridges, in hollows and in shade. A bridge cools from above and below, and there is no warm ground under it. Cold air is heavier than warm air and drains into hollows on calm nights.

Ramps and other spots with no warm ground beneath them freeze the same way as bridges.

In shade the morning sun does not warm the road, so ice can last there for a long time.

The busiest main roads are salted. Smaller roads are sanded, so ice melts more slowly on them.

Slippery spots tend to recur in the same places. On a familiar route it pays to remember them.

On the map Road weather stations stand on main roads, so a day counts as a freezing day while the main road surface is still slightly above zero. The calendar shows such a day in a lighter shade. When winter conditions have started

Why can a spring morning be slippery?

Day +6 °C Night −3 °C

Because the day’s meltwater freezes at night. The sun melts the snowbanks and the water runs onto the road. After a clear night an otherwise dry road can have icy patches in the morning.

Spring driving conditions can change a great deal within a single day.

A late return of winter can bring snow and frost back as late as April.

Studded tyres may be used after 31 March too, if the weather or road conditions require them. When studs are allowed

On the map In spring the colour tells when winter conditions end. Green means there are no freezing days ahead.

What about conditions on the day you drive?

Rengasennuste tells you by which day the winter tyres need to be on. It is not a warning of poor driving conditions. Before you set off, check the Finnish Meteorological Institute’s road weather and warnings.

According to Liikenneturva, the Finnish road safety council, black ice does not in itself cause accidents. What matters is whether the driver adapts their driving to the conditions.

On slippery roads Liikenneturva advises lowering your speed, keeping a longer safety distance, steering gently and avoiding overtaking.

Sources and liability

This page is a plain-language summary, not an official weather or traffic bulletin. It is based on the sources below, all in Finnish unless noted.

The page was checked source by source on 18 October 2026. Errors can be reported to contact@rengasennuste.fi. Final responsibility for the choice of tyres and for driving always rests with the driver. The service’s full disclaimer.